Canon LX-MW500
أرسل لنا استفسارك
PANEL
Type
DLP™ chip
Size and Number
0.65″ diagonal, Single chip
Aspect Ratio
16:10
Native Resolution
1280 x 800 (WXGA), 1024000 pixels
OPTICS
Lamp Type
370W
Lens F Number and Focal Length
F15.75-25.1mm; f=2.45-3.07mm
Zoom Magnification and Control
1.6x
Focus Control
Manual
Lens Shift
V: 52.5% – 57.5% (Manual)
IMAGE AND AUDIO
Brightness
5000 lumens (4000 Eco Mode)
Brightness Uniformity
75%
Contrast Ratio
3750:1
Projection Distance Coverage
1.45m – 5.82m (2.4m-3.9m for 100″ image)
Screen Size
60″-240″ (1.3m x 0.8m – 5.1 x 3.2m)
Projection Ratio
1.12-1.8:1 (Calculated on 100″ image)
Digital Zoom Magnification
2x
Keystone Correction Range
Vertical & Horizontal: +/-30° Manual
Digital Video Scan Systems
1080p / 1080i / 720p / 576p / 480p
MHL Input
1080p / 1080i / 720p / 576p / 576i / 480p / 480i
Component Video Scan Systems
1080p / 1080i / 720p / 576p / 576i / 480p / 480i
Video / S-Video Colour Systems
PAL / PAL-M / PAL-N / PAL-60 / NTSC / NTSC4.43 / SECAM
Display Modes
Presentation, Standard, sRGB, Movie, User 1 & 2
Built-in Speaker
10W
PORTS AND CONNECTORS
Digital RGB / Analogue RGB Input
Mini Dsub 15×2
Digital RGB / Analogue RGB Output
Mini Dsub 15×2
Digital PC / Digital Video / MHL
HDMI / MHL
Digital PC / Digital Video Input
HDMI
S-Video Input
Mini DIN 4-pin
Composite Video Input
RCA
Audio Input L&R
RCA x 2
Audio Input 2
3.5mm stereo mini-jack x 1
Audio Output
3.5mm stereo mini-jack (variable level)
USB Service Port
Type B
Projector Control
Mini D-Sub 9-pin (RS232c)
Network Port
RJ-45 (100Base-TX / 10Base-T) / HDBase-T¹
MECHANISMS
Front Elevation Mechanism
2 x rotary feet (up to 4.5° elevation angle)
RATINGS
Dimensions (W x H x D)
465mm x 112mm x 261mm (excluding protrusions)
Weight
5.4kg
Power Source
100-240 V AC, 50/60Hz
Power Consumption
Modes – Normal: 500W / Eco: 400W
Standby: (LAN on/off) 3W / 0.5W
Lamp Life
Normal: 2000H / Eco: 2500H
Noise Level
Normal: 38dB / Eco: 35dB
Operating Environment
0°C to +40°C
Storage Environment
-10°C to +60°C
Warranty
3 years
Disclaimer
All data is based on Canon standard testing methods except where indicated
Subject to change without notice.
Footnote
¹ When in standby mode Power on is not accepted as a control command via HDBaseT.
المراجعات
لا توجد مراجعات بعد.