XEED WUX500ST
أرسل لنا استفسارك
Specifications in detail
Panel
Type
LCOS reflective display, TFT Active Matrix
Size and Number
0.71” diagonal, 3 panels
Aspect Ratio
16:10
Native Resolution
1920 x 1200 (WUXGA), 2304000 pixels
OPTICS
Lamp Type
280W NSHA
Lens F Number and Focal Length
F2.7; f=8.8mm
Zoom Magnification and Control
1.0x Optical (fixed)
Focus control
Manual
Lens Shift
Vertical: 0% to +75%, Manual
Horizontal: +/-10%, Manual
IMAGE AND AUDIO
Brightness
5000 lumens (3460 lumens in Eco Mode)
Colour Brightness
5000 lumens (3460 lumens in Eco Mode)
Brightness Uniformity
80%
Native Contrast Ratio
2000:1
Projection Distance Coverage
0.35m – 3.64m (1.2m for 100″ image)
Screen size
30” – 300” (65 x 40cm – 646 x 404cm)
Throw Ratio
0.56 : 1
Digital Zoom Magnification
12x max
Keystone Correction Range
Vertical: +/-12°
Horizontal: +/-12°
Digital RGB Compatibility
WUXGA / UXGA / WSXGA+ / SXGA+ / WXGA+ / FWXGA / WXGA / SXGA / XGA / SVGA / VGA
Analogue RGB Compatibility
WUXGA / UXGA / WSXGA+ / SXGA+ / WXGA+ / FWXGA / WXGA / SXGA / XGA / SVGA / VGA
Digital Video Scan Systems
1080p / 1080i / 720p / 576p / 480p
Component Video Scan Systems
1080p / 1080i / 720p / 576p / 576i / 480p / 480i
HDBaseT input
Equivalent to the input for HDMI terminal
Image Modes (Depends on input)
Standard / Presentation / Dynamic / Photo/sRGB / Video / User 1-5 / DICOM sim (only available on DICOM projector model)
USB Supported File Types
JPEG still image
Built-in Speaker
5.0W RMS, Monaural
PORTS AND CONNECTORS
Digital RGB Input
DVI-I 29-pin (shared)
Digital Video and Audio Input
HDMI (supporting Deep Colour)
Analogue RGB Input 1
DVI-I 29-pin (shared)
Analogue RGB Input 2
Mini D-Sub 15-pin (Component via optional adaptor cable)
Audio Input 1
3.5mm stereo mini-jack
Audio Input 2
3.5mm stereo mini-jack
Audio Output
3.5mm stereo mini-jack (variable level)
USB Port
USB Type A
Service Port / RS232C Control
Mini D-Sub 9-pin
Network Port
RJ-45 (1000BASE-T / 100BASE-TX / 10BASE-T)
HDBaseT
RJ-45 (HDBaseT) – see table below
Wired Remote Control
3.5mm stereo mini-jack
wifi
IEEE 802.11b / g / n. Approx 25m. Infrastructure mode & PjAP mode
Wi-Fi WPS
Push button method (PBS) & PIN code method (PIN)
Wi-Fi encryption
Open / WEP / WPA-PSK TKIP / WPA-PSK AES / WPA2-PSK TKIP / WPA2-PSK AES
MECHANISMS
Front Elevation Mechanism
Two rotary feet, 6° maximum image elevation
RATINGS
Dimensions (W x H x D)
337mm x 136mm x 415mm
Weight
6.3kg
Power Source
100V – 240V AC, 50/60Hz
Power Consumption
Normal Mode: 395W / Eco Mode: 295W / Standby: 1.8W / Standby (LAN & HDBaseT off): 0.2W
Lamp Life
3000 hr / 5000 hr (Eco mode)
Noise Level
38dBA / 30dBA (Eco mode)
Operating Environment
0°C to +40°C, 20%RH – 85%RH
Storage Environment
-20°C to +60°C
Warranty
All data is based on Canon standard testing methods except where indicated
Subject to change without notice.
HDBaseT Transmitter operation confirmation chart
A transmitter and a receiver is required to create an HDBaseT system. Normally, HDBaseT entails an external receiver and transmitter, and if these devices are made by the same manufacturer, their performance is usually guaranteed. However, because WUX500ST has a built-in receiver, the receiver and transmitter used will be made by different manufacturers. For this reason, in the list below, confirm that the transmitter you are using works with the projector before use. (Canon does not guarantee operations)
| Brand | Model | Video | Audio | LAN | Serial |
| Crestron | DM-TX-201C | Yes | Yes | Yes | No |
| DM-TX-401C | Yes | Yes | Yes | No | |
| AMX | DX-TX | Yes | Yes | Yes | Yes |
| Kramer | TP-581T | Yes※1 | Yes | Yes | Yes |
| TP-582T | Yes | Yes | Yes | Yes | |
| Gefen | GEF-HDCAT5-ELRPOL | Yes | Yes | No※2 | No |
| Atlona | AT-HDTX-RSNET | Yes※1 | Yes | Yes | No |
| CYP | PU-507-KIT | Yes※1 | Yes | Yes | Yes |
| IDK | HDC-TH100-C | Yes | Yes | Yes | No※3 |
| IMAGENIX | CRO-DE20TX | Yes | Yes | No | No※3 |
※1 When a certain input device is connected, the picture may not be displayed in intended resolution.
※2 LAN transmission disabled when the projector is in Standby mode (Transmitter is incompatible with LPPF2 mode)
※3 Serial transmission disabled when the projector is in Standby mode.
المراجعات
لا توجد مراجعات بعد.